The fundamental manual of the ice maker installing - aicemaker185

I purchased an ice making machine two days ago and that i set up it last night This early morning when i start up the switch, the machine can not work i look into the handbook to determine the place that the difficulties.

So i summed up several matters requirements interest thar you might fulfill inside the flowing while installing the equipment and we wish persons can help to save both time and effort after reading my passage

Here i will emphasize the industry ice making machine simply because its usage quantity is larger and the operating time is longer so we have to pay much time on its set up

The following is one other content related to ice maker machine: We have to propose the environmental protection


The place of the installation:

• You should set up the device at the place without direct sunshine and excellent ventilation as well as the environmental temperature cannot below the outside temperature in winter as the water tube of the outside machine will freeze.
• The minimum venting distance of the condenser is 1m from the shelters. It is advisable that the space is greater in order that the air could flow.
• The ice maker should be installed on the ground solidly where there can not be the incline or there'll be the noise when it functions, what is more, there'd function as the water in the ice storage box and have an effect on the quality of ice.
• When the ice machine is settled down, check the appearance of the machine and wether you can find anything in the falling ice tube and look into the fan blade to find out wether they will turn normally.
• Check all the stop vale to determine wether all of them are opened and look into the oil amount of the compressor and ensure that it stays above the oil level. The oil is very important aspect for the service life of the compressor therefore i hope people can spend much attention on the color of the oil and also the oil level.
• Check the voltage as the ice making machine ought to have its individual water vale and power supply to ensure that we can check it expediently.

My previous blog post: The basic guideline of ice making machine installing